Characteristics of 2SD1616-L Transistor
- Type: NPN
- Collector-Emitter Voltage, max: 50 V
- Collector-Base Voltage, max: 60 V
- Emitter-Base Voltage, max: 6 V
- Collector Current − Continuous, max: 1 A
- Collector Dissipation: 0.75 W
- DC Current Gain (hfe): 135 to 270
- Transition Frequency, min: 160 MHz
- Operating and Storage Junction Temperature Range: -55 to +150 °C
- Package: TO-92
Pinout of 2SD1616-L
The 2SD1616-L is manufactured in a plastic TO-92 case. When looking at the flat side with the leads pointed downward, the three leads emerging from the transistor are, from left to right, the emitter, collector, and base leads.
Here is an image showing the pin diagram of this transistor.
Classification of hFE
The 2SD1616-L transistor can have a current gain of
135 to
270. The gain of the
2SD1616 will be in the range from
135 to
600, for the
2SD1616-K it will be in the range from
200 to
400, for the
2SD1616-U it will be in the range from
300 to
600.
Marking
Sometimes the "2S" prefix is not marked on the package - the 2SD1616-L might only be marked "
D1616-L".
Complementary PNP transistor
The complementary
PNP transistor to the 2SD1616-L is the
2SB1116-L.
SMD Version of 2SD1616-L transistor
The
2SC3444 (SOT-89),
2SD1615 (SOT-89),
2SD1615-GM (SOT-89),
2SD1622 (SOT-89),
2SD602A (SOT-23),
2SD874A (SOT-89),
BCP55 (SOT-223),
BCP55-16 (SOT-223),
BCX55 (SOT-89),
BCX55-16 (SOT-89),
BSP41 (SOT-223),
BSR41 (SOT-89),
FMMTA05 (SOT-23),
KST05 (SOT-23),
MMBTA05 (SOT-23),
PZTA05 (SOT-223) and
SMBTA05 (SOT-23) is the SMD version of the 2SD1616-L transistor. These transistors are of the same type, have similar parameters and are designed for surface mounting.
2SD1616-L Transistor in TO-92 Package
The
KSD1616-Y is the TO-92 version of the 2SD1616-L.
Replacement and Equivalent for 2SD1616-L transistor
You can replace the 2SD1616-L with the
2SC1384,
2SC3243,
2SC3940A,
2SC4408,
2SC4604,
2SD1207,
2SD1347,
2SD1616A,
2SD1616A-L,
2SD1835,
2SD667,
2SD789,
2SD863,
KSD1616,
KSD1616-Y,
KSD1616A,
KSD1616A-Y,
KTC1008 or
KTD863.
If you find an error please send an email to mail@el-component.com